Home » Products » Steel Fiber
Product List
  • Straight type1. Cement label of DM-01 straight type steel fiber may not be less than 425. Water-cement ratio must not be more than 0.5.
    2. Coarse aggregate size shall not exceed 2/3 steel fiber length.
    3. The steel fiber volume should not be less than 0.5%. Generally, it is chosen within 0.5-2%. ...
  • CorrugatedThe length-diameter ratio of this kind of steel fiber is 30 ~70. And the tensile strength is more than 600Mpa. This steel fiber can improve greatly the physical and mechanical performance of concrete. For example, this DM-02 corrugated steel fiber can greatly improve the concrete crack resistance, impact resistance and toughness of concrete. It can change the traditional low tensile, brittle concrete into the high strength and ...
  • Bow typeThe length-diameter ratio of this kind of steel fiber is 40 ~50. And the tensile strength is more than 600Mpa. There are hooks at the tow ends of DM-03 bow steel fiber. This special structure can improve its performance greatly. The special modeling is completely different from other special-shaped steel fibers....
  • Dumbbell-shapedThe length-diameter ratio of this kind of steel fiber is 40 ~50. And the tensile strength is more than 600Mpa. This kind of steel fiber is made from high quality cold rolled steel. DM-04 dumbbell-shaped steel fiber has unique shape. It is an innovation representative of cutting steel fiber. It adopts extrusion process for both ends...
  • Pin TypeThe length-diameter ratio of this kind of steel fiber is 36 ~45. And the tensile strength is more than 750Mpa.
    Due to special performance and well tensile strength, DM-05 pin steel fiber has fabulous strengthening effect on concrete. Compared with the ordinary concrete, the...
  • Melt pumping type and resistance to hot-melt pumpingThe length-diameter ratio of this kind of steel fiber is 40 ~50. And the tensile strength is more than 600Mpa. This DM-06 melt pumping and hot-melt pumping resistance steel fiber is widely used in metallurgical industry, cement industry, petrochemical industry...
  • Micro Brass Coated Steel FiberThe length-diameter ratio of this kind of steel fiber is 50 ~80. And the tensile strength is more than 2880Mpa. This DM-07 micro brass coated steel fiber is mainly used in high speed railway, RPC cover plate and important engineering components. The fiber diameter is 0.2-0.25 mm; the length is 13 mm...
  • Cold Drawn Steel Fiber1. DM-08 cold drawn steel fiber with hooks at both ends can ensure the best hold up state between the steel fiber and the concrete. The performance of the steel fiber can be displayed fully.
    Meanwhile, the cluster of steel fiber can be avoided. The tensile strength of steel fiber can be best utilized....

Special Vehicles

Introduction:
MITG GROUP Pingpu Steel Fibre Factory is a professional manufacturer and provider of sheared steel fiber and cold drawing steel fiber. There are other types of steel fiber in our company such as DM-01 straight type, DM-02 corrugated type, DM-03 bow type, DM-04 dumbbell-shaped type, DM-05 pin type, DM-06 melt pumping type and resistance to hot-melt pumping type, DM-07 micro brass coated steel fiber, DM-08 cold drawn steel fiber, etc.

Application:
Most products in our company are exported to many countries in Asian, African, European, American, etc. The steel fiber is also applied to many military engineering, such as Guangdong, Fujian 2512 Project, Municipal Civil Air Defense Engineering in Baoji, Shanxi province and Daqing, Heilongjiang province, Angola Hydropower Station Project which is under the commander of Guangxi Water Resource & Electric Power Group Co., LTD, N-J Pakistan Hydroelectric Engineering of GeZhou Dam Construction Group, Nuclear Industry in Shanghai, etc. What's more, our steel fiber large can be used in lots of civil engineering. For example, the steel fiber produced in our company was adopted during the construction of Metro Line 7 to 12. Our products also are introduced to some famous projects, such as Shanghai subway project of China Railway 4th Construction Bureau Co. and Shanghai Green Group, the highway in Mawu, Guangxi province, the overpass project in Shanxi and Jiangsu, etc.

MITG GROUP Pingpu Steel Fibre Factory covers 6800 m2. The capital assets can reach 48,000,000 million and the staff surpasses 80 people. The annual production capacity is more than 13000 ton.

Quality Control:
With complete equipment and perfect testing, our company has got the certification of ISO 9001:2009. After years of efforts, we have accumulated rich production and design experience. The product quality is stable and reliable, and the price is reasonable. Our goal is to become one of the influence steel fiber manufacturer at home and abroad.

Steel fiber is mainly used to produce steel fiber concrete. Steel fibre produced though any methods can strengthen the concrete. The strengthening effect of steel fibre depends on concrete strength (FM), the length-diameter ratio of fibre, the volume rate of steel fiber, the bonding strength between the fiber and the concrete (τ), the distribution and orientation of fiber in the matrix (η), etc. when the steel fiber reinforced concrete and destroyed, mostly fiber be plucked up and not be pulled, therefore improve fiber and aluminum is to improve the bonding strength between fiber reinforced the main control factors of effect.
Join steel fiber concrete the compressive strength, tensile strength, flexural strength, impact strength, toughness, impact toughness, such as performance will be improved greatly.

Related Products
  • Backhoe Loader XT876 backhoe loader is a kind of the wheeled excavating and loading engineering machinery. It's equipped with double bucket. The digging device can be pushed...
  • Motor Grader 1. Equipped with DongFeng Cummins engine
    2. Sing-handle electro-hydraulic controlled power-shift T/M, 6forward &3reverse shifts...